Troubleshooting Tips For Setting The Memory Clock In BIOS

Dec 31, 2021 English

Sometimes your computer may return an error code indicating that the BIOS has set the memory frequency. There can be several reasons for this error.

PC running slow?

  • Step 1: Download and install the ASR Pro software
  • Step 2: Open the program and click on "Restore PC"
  • Step 3: Follow the on-screen instructions to complete the restoration process
  • Increase your computer's speed and performance with this free software download.

    You start to navigate to the OC tab type or the location of the Mind Controller settings in the current BIOS. Be sure to refer to these guides. And you will go straight here.

    When you update the retention period, your computer usually detects optimizations and adapts accordingly, but recently it is not always available due to technological changes. The fastest memory or RAM available today may have exceeded the speed for which your computer was designed. If so, you will need to reset your XMP settings in BIOS to get the speed you paid for.

    Test Your Memory

    Load CPU-Z application from CPUID. This free utility informs you that this type of storage will give you its range, size, sync settings and harcourse characteristics. It also gives you extensive information about your CPU, motherboard, and chipset.

    Open CPU-Z

    Start CPU-Z and click its SPD on the instance tab. You do not know what type of exploratory memory is installed. It tells you about every memory module in your computer, its RAM range, manufacturer, part number and maximum possible speed in MHz. Select each port to see what’s installed.

    Find The Best Speed For Your RAM

    Check the maximum speed of your storage, which is determined by the manufacturer based on the usage data in the SPD tab.

    V

    Display The Current Speed Of Your RAM

    Click the “CPU-Z Memory” tab. Here you can also see your memory cadence in MHz (frequency). When you get DDR RAM, the speed shown is half what it actually is. This is due to the fact that DDR (Double Facts Rate) memory has an effective efficiency that is twice the frequency. If your CPU-Z shows your main memory is working butNormally at 1400 MHz, your DDR-RAM has an effective speed of 2800 MHz.

    If CPU-Z tells you that your RAM is spinning slower than specified by the manufacturer, you can configure it in the BIOS.

    How To Access BIOS

    How do I Change my RAM settings in BIOS Windows 10?

    Method. Once you enter the BIOS, you will find your way to the “Overclock” settings by looking for storage locations. From there you need to bring up the “DRAM Timing Mode” setting, then “Advanced DRAM Configuration”, which will always take you to another movie where you can manually enter the values ​​for my memory timings.

    bios set memory clock

    To enter BIOS, you need to restore your computer and press an explicit key combination shortly before everything starts over. The key truth varies from computer to computer, so it’s better to know what it is. Tom’s Hardware offers a pretty clever guide to the keys used by various manufacturers, but often when you get started, the DEL, F2, or F1 keys are commonly used.

    After restarting your computer, keep the desired key aside. When a specific BIOS or UEFI screen appears, enter the keys. BIOS stands for Basic System, Input / Output, and UEFI stands for Unified Extensible Firmware Interface. To this end, they are essentially the same.

    It is important to note that not all computers allow clients to access the BIOS. This is especially true for laptops.

    How To Change The RAM Speed In BIOS

    After entering the UEFI BIOS, look for the XMP icon. XMP stands for Extreme Memory Profile and is Intel technology because you can select a user profile for your memory to change schedules.

    PC running slow?

    Do you have a computer thats not running as fast as it used to? It might be time for an upgrade. ASR Pro is the most powerful and easy-to-use PC optimization software available. It will quickly scan your entire system, find any errors or problems, and fix them with just one click. This means faster boot times, better performance, fewer crashes all without having to spend hours on Google trying to figure out how to fix these issues yourself! Click here now to try this amazing repair tool:


    The likely location of the XMP button depends on your computer’s activity. If you are using MSI BIOS, it can usually be found in the main menu. For other computers, you can browse several listings to find it. So if this is a good new option, start building from memory.

    Press the XMP button to select a function that the software says is enabled. In some cases, this important fact is all you need to specify, but if your RAM has an option besides XMP, choose one of the faster ones.

    Press the keys indicated in “Save” and “Exit Bios”. Here they also differ; However, Esc is almost always the key to confirm receipt.

    Unless you are a computer professional, it is not recommended to manually change advanced settings in BIOS, especially memory speed.

    The motherboard manual must contain the appropriateGeneral information.

    You have to enter 6 values, which can be in different places

    bios set memory clock

    1. Memory speed. Marketing departments like to sidestep this approach. The rating of the platform will indicate “1600 MHz”, this may actually be the transmission speed. Since these are dual data rate (DDR) modules, the I / O creates two stickers per bus per bus cycle. Consequently, the actual “bus frequency” for this component is 800 MHz and the travel speed is sixteen hundred MP / s (mega transmissions per second).

    Your motherboard environment can express this number in different ways, it can express it for bus frequency, as a step frequency, or as DDR3 compatibility. It takes a bit of a specially trained eye to tell the first two apart, but when referred to as a standard (sometimes prefixed with DDR3-xxxx, where xxxx is probably speed), it’s easy to spot.

    2. The DRAM voltage needs to be adjusted. This module can run from 1.5 volts, and your motherboard should already be set to 1.5 volts, but it won’t work with trauma check!

    3. Now thismy hardest part. You must configure up to 4 DRAM timings. The item automatically successfully configures the modules to 7-7-7-21 or 8-8-8-24. You may need to set it to 9-9-9-24 or 9-9-9-27 (preferably 9-9-9-24) for it to work properly at DDR3-1600 speeds.

    Four treasures you must change in this order:

    This can usually be found in the DRAM overclocking message in your system settings.

    Increase your computer's speed and performance with this free software download.